Material incorporated by reference

This page provides a list of material incorporated by reference in regulations under the Climate Change Response Act and outlines how the public can access this material.

This information is also available at Notice stating where material incorporated by reference into regulations under the Climate Change Response Act 2002 is available for Inspection or purchase [New Zealand Gazette website].

Climate Change (Stationary Energy and Industrial Processes) Regulations 2009 (first made on 28 September 2009) incorporated the following material by reference:

  • ASTM D6348-03 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy.
  • ASTM D6866-08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis.
  • VDI 2469-1:2005 Gaseous emission measurement - Measurement of nitrous oxide - Manual gas chromatographic method, February 2005.
  • ISO 14164:1999(E) Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method.
  • ISO 12039:2001(E) Stationary source emissions - Determination of carbon monoxide, carbon dioxide and oxygen - Performance characteristics and calibration of automated measuring systems.
  • ISO 10780:1994(E) Stationary source emissions - Measurement of velocity and volume flowrate of gas streams in ducts.
  • ISO Guide 34:2000 General requirements for the competence of reference material producers.
  • ISO Guide 34:2000 General requirements for the competence of reference material producers.
  • USEPA - Method 3A - Determination of Oxygen and Carbon Dioxide Concentrations in Emissions from Stationary Sources (Instrumental Analyzer Procedure) (2006).
  • USEPA - Method 3C - Determination of Carbon Dioxide, Methane, Nitrogen, and Oxygen from Stationary Sources (1996).
  • GPA Standard 2166-05 Obtaining Natural Gas Samples for Analysis by Gas Chromatography.
  • ASTM D1945-03 Standard Test Method for Analysis of Natural Gas by Gas Chromatography.
  • The Aluminium Sector Greenhouse Gas Protocol (Addendum to the WRI/WBCSD Greenhouse Gas Protocol) - October 2006 (produced by the International Aluminium Institute).
  • ASHRAE 34-2007 Designation and Safety Classification of Refrigerants published in 2007 by the American Standards Institute/American Society of Heating, Refrigeration and Air-Conditioning Engineers, Inc.
  • ISO 1170:1977 Coal and coke-Calculation of analyses to different bases.
  • ISO 501:2003 Hard coal-Determination of the crucible swelling number.

Climate Change (Unique Emissions Factors) Regulations 2009 (first made on 28 September 2009) incorporated the following material by reference:

  • ASTM D6348 03 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy.
  • ASTM D6866 - 08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis.
  • VDI 2469-1:2005 Gaseous emission measurement - Measurement of nitrous oxide - Manual gas chromatographic method, February 2005.
  • ISO 14164:1999(E) Stationary source emissions - Determination of the volume flowrate of gas streams in ducts - Automated method.
  • ISO 12039:2001(E) Stationary source emissions - Determination of carbon monoxide, carbon dioxide and oxygen - Performance characteristics and calibration of automated measuring systems.
  • ISO 10780:1994(E) Stationary source emissions - Measurement of velocity and volume flowrate of gas streams in ducts.
  • USEPA - Method 3A - Determination of Oxygen and Carbon Dioxide Concentrations in Emissions from Stationary Sources (Instrumental Analyzer Procedure) (2006).
  • USEPA - Method 3C - Determination of Carbon Dioxide, Methane, Nitrogen, and Oxygen from Stationary Sources (1996).
  • ISO 18283:2006(E) Hard coal and coke - Manual sampling.
  • ISO 1928:1995(E) Solid mineral fuels - Determination of gross calorific value by the bomb calorimetric method, and calculation of net calorific value.
  • ISO 5068-1:2007(E) Brown coals and lignites - Determination of moisture content - Part 1: Indirect gravimetric method for total moisture.
  • ISO 1171:1997(E) Solid mineral fuels - determination of ash content.
  • AS 1038.6.4-2005 Coal and coke - Analysis and testing Part 6.4: Higher rank coal and coke - Ultimate analysis - Carbon, hydrogen and nitrogen - Instrumental method.
  • ASTM D3174 04 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal.
  • ISO/TS 12902:2001(E) Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen - Instrumental methods.
  • ASTM D 3302 Standard Test Method for Total Moisture in Coal.
  • ASTM E947-83(2007) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis.
  • ASTM E1675-04 Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis.
  • NZS ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories.
  • ISO 4259:2006(E) Petroleum products - Determination and application of precision data in relation to methods of test.
  • ASTM D5291-02 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen and Nitrogen in Petroleum Products and Lubricants.
  • ASTM D1298-99 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method.
  • ISO 3675:1998(E) Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method.
  • DD CEN/TS 14778-1:2005 Solid biofuels - Sampling - Part 1: Methods for sampling.
  • DD CEN/TS 15442:2006 Solid recovered fuels - Methods for sampling.
  • ASTM D4057-06 Standard Practice for Manual Sampling of Petroleum and Petroleum Products.
  • ASTM D4177-95 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products.
  • ISO 3170:2004(E) Petroleum liquids - Manual sampling.
  • DD CEN/TS 15407:2006 Solid recovered fuels - Method for the determination of carbon (C), hydrogen (H) and nitrogen (N) content.
  • DD CEN/TS 15400:2006 Solid recovered fuels - Determination of calorific value.
  • ASTM D240-02 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter.
  • ISO 5167-1:2003(E) Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements.
  • DD CEN/TS 15440:2006 Solid recovered fuels - Methods for the determination of biomass content.

Climate Change (Eligible Industrial Activities) Regulations 2010 (first made on 5 July 2010) incorporated the following material by reference:

  • NZS 3122:2009 Specification for Portland and blended cements (General and special purpose).
  • NZS 3123:2009 Specification for pozzolan for use with Portland and blended cement.
  • NZS 3125:1991 Specification for Portland-limestone filler cement.
  • Codex Standard 212-1999 Codex Standard for Sugars.
  • Codex Standard 289-1995 Codex Standard for Whey Powders.

Climate Change Climate Change (Forestry Sector) Regulations 2008 (first made on 29 September 2008) incorporated the following material by reference:

  • International Code of Botanical Nomenclature (Vienna Code) 2006.
  • Inspecting Material

Public access to material

All the material incorporated by reference is available for inspection free of charge, week days between 9.00am and 5.00pm, at the Ministry for the Environment's head office at
Environment House
23 Kate Sheppard Place
Thorndon
Wellington 6011.

To make an appointment to inspect the incorporated material please contact the Ministry for the Environment on
Telephone: (04) 439 7537.
Email: infocentre@mfe.govt.nz
Photocopying of incorporated material will not be permitted.

Purchase of material

Material may be purchased directly from:
Standards New Zealand
Level 6
8 Gilmer Terrace
Wellington 6011.

By post:

Private Bag 2439, Wellington 6140.

Website (for online purchases):
www.standards.co.nz
Telephone (for ordering by freephone):
0800 782 632.

Email (for ordering by email):
enquiries@standards.co.nz

Reviewed:
05/06/16